OFFSHORE RELATED LAWS, REGULATIONS & CODES AND STANDARDS

OFFSHORE RELATED LAWS, REGULATIONS & CODES AND STANDARDS

1.0 INTRODUCTION

The following is a list of organisations whose codes, standards, recommended practices laws and regulations, are to be used during the project.

• Republic of Indonesian laws and Regulations
• American Petroleum Institute (API)
• American National Standards Institute (ANSI)
• American Society for Testing and Materials (ASTM)
• American Society of Mechanical Engineers (ASME)
• American Society for Non Destructive Testing (ASNT)
• American Welding Society (AWS)
• American Society of Civil Engineers (ASCE)
• American Institute of Steel Construction (AISC)
• American Iron and Steel Institute(AISI)
• American Concrete Institute (ACI)
• American Association of State Highway and Transportation Officials(AASHTO)
• American Institute of Chemical Engineers (AICHE)
• American Water Works Association (AWWA)
• American Gas Association(AGA)
• American Gas Institute
• American Gear Manufacturers Association (AGMA)
• American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE)
• Expansion Joints Manufacturers Association (EJMA)
• Fluid Controls Institute (FCI)
• Gas Processors Association (GPA)
• Gas Processors Suppliers Association (GPSA)
• Institute of Electrical and Electronic Engineers (IEEE)
• Instrument Society of America (ISA)
• Insulated Cable Engineers Association (ICEA)
• International Association of Light house Authorities (IALA)
• International Electrotechnical Commission (IEC)
• Illuminating Engineering Society (IES)
• Manufacturer’s Standardisation Society of valve & fittings (MSS)
• Metal Building Manufacturers Association (MBMA)
• Modified U.S.C.G Regulations for LNG Navigation Regulations
• National Association of Corrosion Engineers (NACE)
• National Concrete Masonry Association (NCMA)
• National Electrical Manufacturers Association(NEMA)
• National Fire Protection Association (NFPA)
• National Safety Council (NSC)
• Occupational Safety and Health Administration (OSHA)
• Oil Companies International Marine Forum (OCIMF)
• Scientific Apparatus Makers Association (SAMA)
• Sheet Metal and Air Conditioning Contractors National Association (SMACNA)
• Society of Automotive Engineers (SAE)
• Society of International Gas Tanker and Terminal Operators Navigation Standards
• Steel Structures Painting Council (SSPC)
• Tubular Exchanger Manufacturers Association (TEMA)
• Underwriter’s Laboratories (UL)
• United States Coast Guard (USCG)
• Uniform Building Code (UBC)
• Welding Research Council (WRC)
• COMPANY PetroChina International Jabung Ltd

2.0 MECHANICAL, PIPING AND HVAC
API
API RP11 PGT Recommended Practice for Packaged Combustion Gas Turbines.
API Spec 12F Specification for Shop Welded Tanks for Storage of Petroleum Liquids.
API Spec 5L Specification for Line Pipe (PC)
API Spec 6D Specification for Pipeline Valves.
API Spec 6FA Specification for Fire Test for Valves.
API Spec 9A Specification for Wire Ropes.
API Standard 594 Check Valves, wafer, wafer-Lug & Double Flanged
API Standard 598 Valve Inspection and Testing
API Standard 607 Fire Test for Soft Seated Quarter-Turn Valves.
API Standard 610 Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry Service.
API Standard 613 Special Purpose Gear Units for Petroleum, Chemical and Gas Industry Service.
API Standard 614 Lubrication, Shaft Sealing, and Control Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services.
API Standard 616 Gas Turbines for Petroleum, Chemical and Gas Industry Service.
API Standard 617 Centrifugal Compressors for Petroleum, Chemical and Gas Industry Services.
API Standard 618 Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services.
API Standard 619 Rotary Type Positive Displacement Compressors for Petroleum, Chemical and Gas Industry Services.
API Standard 650 Welded Steel Tanks for Oil Storage.
API Standard 660 Shell and Tube Heat Exchanger for Refinery Service.
API Standard 661 Air-Cooled Heat Exchangers for General Refinery Services.
API Standard 670 Vibration Axial-Position and Bearing-Temperature Monitoring Systems.
API Standard 671 Special Purpose Couplings for Petroleum, Chemical and Gas Industry Services.
API Standard 674 Positive Displacement Pumps – Reciprocating
API Standard 675 Positive Displacement Pumps – Controlled Volume.
API Standard 676 Positive Displacement Pumps – Rotary.
API Standard 677 General Purpose for Gear Unit for Petroleum, Chemical and Gas Industry Services.

API RP 686
Recommended Practices for Machinery Installation and Installation Design
API Standard 530 Calculation of Heater Tube Thickness in Petroleum Refineries
API Standard 560 Fired Heaters for General Refinery Services.
API RP 520 Sizing, Selection and Installtion of Pressure relieving devices in refineries
API RP 521 Guide for Pressure Relieving and Depressuring Systems
API PUBL 535 Burners for Fired Heaters in General Refinery Services.
API Standard 1102 Recommended Practice for Steel Pipeline Crossings of Railroads and Highways
API Standard 1107 Recommended Practice for Pipeline Maintenance Welding Practices
API Standard 1110 Recommended Practice for Pressure Testing of Liquid Petroleum Facilities.
API PUBL 2200 Repairing Crude Oil, Liquefied Petroleum Gas and Product Pipelines.
API PUBL 2510 Design Construction of LPG Installation.
API PUBL 2510A Fire Protection Considerations for the Design and Operation of LPG Facilities.
ASME
PTC 10 Performance Test Code on Compressors and Exhausters.
PTC 22 Performance Test Code on Gas Turbine.
ASME Sec I Rules for Construction of Power Boilers
ASME Sec VIII Div 1 Boiler and Pressure Vessel Code – Rules for Construction of Pressure Vessels
ASME Sec VIII Div 2 Boiler and Pressure Vessel Code – Rules for Construction of Pressure Vessels – Alternative Rules
ASME Sec II Materials
ASME Sec V Non-Destructive Examination
ASME Sec IX Welding and Brazing Qualifications
ASME B16.10 Face-to-Face and End to End Dimensions of Valves
ASME B16.11 Forged Fittings, Socket Welding and Threaded
ASME B16.14 Ferrous Pipe Plugs, Bushings and Locknuts with Pipe Threads

ASME B16.20 Metallic Gaskets for Pipe Flanges, Ring Joint, Spiral Wound
ASME B16.47 Large Diameter Steel Flanges NPS 26 thru NPS 60
ASME B16.5 Pipe Flanges and Flanged Fittings NPS ½ thru NPS 24
ASME B16.9 Factory made Wrought Steel ButT-Welding Fittings
ASME B31.3 Process piping
ASME B31.5 Refrigeration piping
ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids.
ASME B31G Manual for Determining the Remaining Strength of Corroded Pipelines
ASME B36.19M Stainless steel pipe
ASME B46.1 Surface texture
ASME B73.1M Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process.
ASME B73.2M Specification for Vertical In-Line Centrifugal Pumps for Chemical Process
ASTM
ASTM A 123 Standard Specification for Zinc (Hot Dip Galvanised) Coatings on Iron & Steel Product
ASTM A153 Standard Specification for Zinc Coating (Hot Dip) on Iron Steel Hardware
ASTM D 2842 Water Adsorption of Rigid Cellular Plastics
ASTM C 591 Unfaced Preformed Rigid Cellular Poly isocynaurate Thermal Insulation

ASTM C 592 Mineral Fiber Blanket Insulation and Blanket Type Pipe Insulation

ASTM C 612 Mineral Fiber Block and Board Thermal Insulation
ASTM C 795 Thermal Insulation for Use in Contact with Austenitic Stainless Steel

ASTM D714 Method of Evaluating Degree of Blistering Paints
ASTM D 756 Determination of Weight and Shape Changes of Plastic
ASTM D3363 Standard Test Method for Film Hardness by Pencil Test
ASTM E 84
Surface Burning Characteristics of Building Materials

NACE Standards

NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.
NACE 01-06 Surface Preparation Standards

MISCELLANEOUS

AWS D1.1 Structural Welding Code for Steel
TEMA Standard of the Tubular Exchanger Manufacturers Association
IEC International Electro technical Commission
MSS SP 25 Standard Marking System for Valves, Fittings Flanges and Unions
MSS SP 53 Quality Standard for Steel Castings – Magnetic Particle Examination Method
MSS SP 44 Steel Pipeline Flanges
MSS-SP-45 By-pass and Drain Connection Standard
MSS SP 55 Quality Standard for Steel Castings – Visual Method
MSS SP 80 Bronze Gate, Globe Angle and Check Valves
IMO International Maritime Organisation
OSHA Noise Procedure Specification
EJMA Expansion Joint Manufacturer Association
ALPEMA The Standard of the Brazed Aluminium Plate-Fin Heat Exchanger Manufacturers Association
WRC 107 Local stress In Spherical and Cylindrical Shells due to External Loadings
AISC Manual of Steel Construction, Allowable Stress Design. 9th edition.
SSPC Steel Structures Painting Council
RS-222-C Structural Standards for Steel Antenna Towers and Antenna Supporting Structures.

HVAC INDUSTRY STANDARDS AND CODES

AMCA
Air Moving and Conditioning Association, Volumes 4 and 5
ANSI American National Standards Institute, Series B and C
API American Petroleum Institute RP2G and RP500B

ARI American Refrigeration Institute
ASHRAE American Society of Heating, Refrigerating and Air Conditioning Engineers
ASTM American Society of Testing and Materials
IEC International Electrotechnical Commission
NFPA National Fire Protection Association NFPA 70C, 90A, 90B, 91 and 96
SMACNA Sheet Metal and Air Conditioning Contractors’ National Association
UL Underwriters’ Laboratories, Inc.
DW142 Specification for sheet metal ductwork, low, medium and high velocity, pressure air system
ADC Air Diffusion Council
AMI Air Moving and Conditioning Association
ASME The American Society of Mechanical Engineers
OCMA Oil Companies Materials Association
IEC79-13 International Electro Technical Commission – Construction and use of rooms or buildings protected by pressurisation
API American Petroleum Institute – Accelerometer-Based Vibration Monitoring System

3.0 PIPELINE

API

API Spec 5L Specification for Linepipe
API Spec 5LC Specification for CRA Clad Linepipe
API Spec 5LD Specification for CRA Clad or Lined Steel Pipe
API 6D Specification for Pipeline Valves
API 17A Specification for Pipe Flanges and Pipe Fittings
API 1102 Recommended Practice for Steel Pipeline Crossings of Railroads and Highways
API 1104 Standard for Welding Pipelines and Related Facilities
API 1107 Recommended Practice for Pipeline Maintenance Welding Practices
API 1110 Recommended Practice for Pressure Testing of Liquid Petroleum Facilities
API PUBL 2200 Repairing Crude Oil, Liquefied Petroleum Gas and Product Pipelines
API RP 5L8 Field Inspection of New Line Pipe
API RP 5LW Recommended Practise for Marine Transportation of Linepipe

ANSI/ASME

ASME B16.5 Pipe Flanges and Flanged Fittings
ASME B16.34 Valves – Flanged, Threaded and Welding ends
ASME B16.20 Metallic Gaskets for Pipe Flanges
ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids
ASME B31G Manual for Determining the Remaining Strength of Corroded Pipelines
ANSI/AWWA C203 Coal Tar Protective Coatings and Linings for Steel Water Pipelines, Enamel and Tape, Hot Applied
ASNT

ASNT TC-1A Personnel Qualification and Certification in Non-destructive Testing
ASTM

ASTM A182 Forged or Rolled alloy steel pipe flanges, Forged Fittings and Valves
ASTM A262 Standard Practice for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steel
ASTM A264 Specification for Corrosion Resistant Chromium Nickel Steel Clad Plate, Sheet and Strip
ASTM A265 Standard Specification for Nickel and Nickel based Alloy Clad Steel Plate
ASTM A275 Magnetic Particles Examination of Steel Forgings
ASTM A370 Test Methods and Definitions for Testing of Steel Products
ASTM A578 Standard Specification for Straight Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
ASTM A694 Standard Specification for Forgings, Carbon and Alloy Steel, for Pipe Flanges, Fittings, Valves and Parts for High Pressure Transmission Service.
ASTM A707 Flanges, Forged Carbon and Alloy Steel for Low Temperature Service
ASTM A751 Methods Practices and Terminology for Chemical Analysis of Steel Products
ASTM A789 Seamless and Welded Ferritic and SS tubing for General Services
ASTM A790 Seamless and Welded Ferritic/Austenitic stainless steel pipe
ASTM C162 Glass and Glass Products, Definition of Terms
ASTM D149 Tests for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials
ASTM D870 Testing of water resistance of Coatings using water Immersion
ASTM D1141 Preparation of Substitute Ocean Water Specification
ASTM D1248 Specification for Polyethylene Plastics Extrusion Materials for wire and cables
ASTM D1653 Test for Water Vapour Transmission of Organic Coating Films
ASTM D2240 Test for Rubber Properties – Durometer Hardness
ASTM E94 Standard Guide for Radiographic Testing.
ASTM E165 Practice for Liquid Penetrant Inspection Method
ASTM E168 General techniques of Infrared Quantitative Analysis
ASTM E337 Test for Relative Humidity by Wet and Dry Bulb Psychrometer
ASTM E562 Practice for Determining Volume Fraction by Systematic Manual Point Count
ASTM E709 Practice of Magnetic Particle Examination
ASTM F21 Hydrophobic Surface Films by Atomizer Test
ASTM G8 Cathodic Disbonding of Pipeline Coatings
ASTM G10 Test for Bendability of Pipeline Coatings
ASTM G14 Test for Impact Resistance of Pipeline Coatings
ASTM G17 Test for Penetration Resistance of Pipeline Coatings
ASTM G20 Test for Chemical Resistance of Pipeline Coatings
ASTM G48 Standard test method for pitting and crevice corrosion resistance of standards steels and related alloys by the use of ferric chloride solutions.
ASTM B127 Standard Specification for Nickel-Copper Alloy (UNS 4400) Plate

NACE Standards

NACE RP0274 High Voltage Electrical Inspection of Pipeline Coatings Prior to Installation
NACE RP0287 Field Measurement of Surface Profile of Abrasive Blast Cleaned Surfaces using Replica Tape (TESTEX)
NACE TM0177 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in H2S Environments
NACE TM0284 Test Methods for Evaluation of Pipeline and Pressure Vessel Steel for Resistance Hydrogen Induced Cracking
NACE MR-0175 Sulfide Stress Cracking Resistant Metallic Material for Oil Field Equipment

SSPC Standards

SSPC PA 2 Measurement of Dry Paint Thickness with Magnetic Gauges
SSPC SP 1 Surface Preparation Specification No 1, Solvent Cleaning
SSPC SP2 Hand Tool Cleaning
SSPC SP 3 Power Tool Cleaning
SSPC SP 5 White metal Blast Cleaning
SSPC SP 10 Near White Metal Finish
SSPC COM Surface Preparation Commentary

4.0 PROCESS

API Spec 12J Specification for Oil and Gas Separators.
API RP 520 Recommended Practice for Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries.
Part 1 – Sizing and Selection
Part 2 – Installation
API RP 521 Guide for Pressure Relieving and Depressurising Systems.
API RP 750 Management of Process Hazards
API STD 2000 Guide for venting Atmospheric and Low Pressure Storage Tanks

MISCELLANEOUS

TEMA Standards of the Tubular Exchanger Manufacturers Association
API

5.0 FIRE AND GAS, FIRE PROTECTION, AND SAFETY

National Fire Codes of National Fire Protection Association

NFPA 10 Standard for Portable Fire Extinguishers.
NFPA 11 Standard for Low Expansion Foam Systems
NFPA 12 Standard on CO2 Fire Extinguishing Systems.
NFPA 13 Standard for the Installation of Sprinkler System.
NFPA 14 Standard for the Installation of Standpipe and Hose Systems.
NFPA 15 Standard for Water Spray Fixed Systems for Fire Protection.
NFPA 16 Standard on Deluge Foam-Water Sprinkler and Foam-Water Spray Systems.
NFPA 17 Standard for Dry Chemical Extinguishing Systems.
NFPA 20 Standard for the Installation of Stationary Pumps for Fire Protection.
NFPA 22 Standard for Water Tanks for Private Fire Protection
NFPA 24 Standard for Installation of Private Fire Service Mains and Their Appurtenances
NFPA 30 Standard for Flammable and Combustible Liquids Code.
NFPA 37 Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines.
NFPA 70 National Electric Code
NFPA 72 National Fire Alarm Code.
NFPA 75 Standard for Protection of Electronic Computer/ Data Processing Equipment.
NFPA 90 Installation of Air Conditioning and Ventilation Systems.
NFPA 96 Cooking Equipment Vapour Removal.
NFPA 101 Code for Safety to Life from fire in building and structures.
NFPA 110 Standard for Emergency and Standby Power Systems.
NFPA 321 Standard on Basic Classification of Flammable and Combustible Liquids.
NFPA 496 Standard for Purged and Pressurised Enclosures for Electrical Equipment.
NFPA 1961 Standard on Fire Hose.
NFPA 1962 Standard for the Care, Use and Maintenance of Fire Hose Including Connections and Nozzles.
NFPA 1964 Standard for Spray Nozzles (Shut-off and Tip).
NFPA 1971 Protective Clothing – Structural Fire Fighting
NFPA 1976 Protective Clothing – Proximity Fire Fighting
NFPA 1981 Self Contained Breathing Apparatus
NFPA 1982 Personal Alerts Safety Systems for Fire Fighter
NFPA 1991 Vapor-Protective Suits for Hazardous Chemical Emergencies
NFPA 1992 Liquid Splash-Protective for Hazardous Chemical Emergencies
NFPA 1993 Support Function Protective for Clothing for Hazardous Chemical Operations
NFPA 2001 Clean Agent Fire Extinguishing Systems.

API

API STD 526 Flanged Steel Safety Relief Valves.
API STD 527 Seat Tightness of Pressure Relief Valves.
API RP 576 Inspection of Pressure Relieving Devices.
API RP 750 Management of Process Hazards.
API STD 2000 Venting Atmospheric and Low Pressure Tanks.
API RP 2001 Fire Protection in Refineries
API RP 2003 Protection against Ignitions arising out of static lighting and Stray Currents.
API PUBL 2021 Guide to Fighting Fire around Petroleum Storage Tanks
API PUBL 2030 Guidelines for Application of Water Spray Systems for Fire Protection in the Petroleum Industry.
API PUBL 2031 Combustible Gas Detector Systems.
API PUBL 2216 Ignition Risk of Hydrocarbon Vapours by Hot Surfaces in Open Air.
API PUBL 2218 Fireproofing practices in Petroleum and Petrochemical Processing Plants.
API STD 2510 Design and Construction of LPG Installation
API PUBL 2510A Fire Protection Consideration for the Design and Operation of LPG Facilities

Republic of Indonesian Laws and Regulations
– Republic of Indonesia Law and Regulation No. 4/1982 (revised by No. 23/1997) regarding “Basic Stipulation of Environmental Treatment”.
– Government Regulation No. PP 20/1990 regarding control of “Water Pollution”
– Decree of the State Minister for Environment (KEP-51/MENLH/10/1995) about “Liquid Waste Water Standards for Industrial Activities”
– Decree of the State Minister for Environment (KEP-13/MENLH/11/1995) about “Standards of Emission of Air Pollutant caused by non-moving object”
– Decree of the State Minister for Environment (KEP-42/MENLH/10/1996) about “Waste Water Standard in Geothermal/Oil and Gas Activities”
– Decree of the State Minister for Environment (KEP-48/MENLH/11/1996) about “Noise Level Standards”
– Decree of the State Minister for Environment (KEP-49/MENLH/11/1996) about “ Vibration Level Standards”
– Decree of the State Minister for Environment (KEP-45/MENLH/10/1997) about “Air Pollutant Standard – Index” and No.41/1999 regarding Air Pollution
– Decree of the State Minister for Environment (KEP-13/MENLH/11/1994) regarding Environmental Audit
– Government Regulation No. 27/1999 regarding Environmental Impact Management Agency
– Sumatra Selatan Provincial Law No. 5/1994 regarding Sumatra Selatan Province Space Layout Planning
– Decree of the Head of Environmental Impact Management Agency No. KEP/105/1997 regarding Guidelines for Environmental Treatment Implementation and Planning.

USA FEDERAL REGULATIONS

29 CFR Sections 1910.144 – Safety Colour Code for Marking Physical Hazards.
Section 1910.145 Specifications for Accident Prevention Signs.
29 CFR Section 1910.24 Fixed Industrial Stairs.
Section 1926.501 Stairways.
Section 1910.22 (b) Aisles and Passageways.
Section 1910.27 – Fixed Ladders.
Section 1926.450 – Ladders.
33 CFR Navigational and Navigable Waters Part 140. Outer Continental Shelf-Activities, Section 143.15 Lights and Warning Devices and Section 67 Aids to Navigational on Artificial Islands and Fixed Structures.
33 CFR Section 144.01 – 15 – Alternates for Life Floats.
33 CFR Section 144.01 – Life Preservers.
33 CFR Section 144.01 – 25 Ring Life Buoys.
46 CFR Section 160.035 – Lifeboats for Merchant Vessels.
46 CFR Section 164.018 – Rectroflective Material for Life Saving Equipment.
46 CFR Section 160.050 Specifications for a Buoy, Life Ring Unicellular, Plastic.

6.0 INSTRUMENTATION

ASME

ASME-MFC 2M Measurement Uncertainty for Fluid Flow in Closed Conduits.
ASME-MFC 3M Differential producers Used for the Measurement of Fluid flow in Pipes.
ASME-MFC 5M Measurement of Liquid flow in Closed Conduits Using Transit Time Ultrasonic Flowmeters.
ASME-MFC 6M Measurement of Fluid Flow in pipes using Vortex Flowmeters.
ASME-MFC 11M Measurement of Fluid Flow by Means of Coriolis Mass Flowmeter.
ASME-MFC 14M Measurement of Fluid Flow using Small Bore Orifice meters.
ASME-MFFCC SC15 Standard Method for Establishing Installation Effects on Flowmeters.
ASME-MFC 16M Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters.
ASME-MFC SC17 Measurement of Fluid flow in Closed Conduits using Multiport averaging Pitot primary meters.
ASME-PTC 19.1 Measurement Uncertainty.
ASME B16.10 Valve Face-to-Face and End to End Dimensions of Valves
ASME B16.34 Valves-Flanged, Threaded and Welded End
ASME B16.5 Pipe Flanges and Fittings
ASME B31.3 Process Piping
ASME B 46.1 Surface Texture
ASME VIII Boiler and Pressure Vessel Code

ASTM

ASTM E709
Magnetic Particle Examination
ASTM A 193 Specification for Alloy Steel and Stainless Steel Bolting Material for High – Temperature Services
ASTM A 269 Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

API

API 598 Valve Inspection and Test
API RP 500 Classification of Location for Electrical Installation at Petroleum Facilities
API RP 520 Sizing, Selection & Installation of Pressure Relieving Devices in Refineries Parts 1 & 2
API STD 526 Flanged Steel Safety Relief Valves
API STD 527 Commercial Seat Tightness of Safety Relief Valves with Metal to Metal Seats
API RP 14C Recommended Practice for Analysis, Design, Installation and testing of Basic Surface of safety Systems for Offshore Production Platforms
API RP 521 Guide for Pressure Relief and Depressuring System
API STD 2000 Venting of Atmospheric Low Pressure Storage Tanks
API RP 14 F Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for unclassified and Class I, Division 1 and Division 2 location
API RP551 Processing, Measurement, Instrumentation.
API RP 552 Transmission System
API RP 554 Process Instrumentation and Control
API RP 555 Process Analysers
API STD 598 Valve Inspection and Test
API STD 607 Fire Test for Soft Seated Valves
API 6D Specification for Pipeline Valves
API STD 670 Vibration, Axial Position and Bearing Temperature Monitoring System
API RP 6FA Fire Test for Valves
IEC

IEC 60801 Electro Magnetic Compatibility for Industrial Process Measurement and Control Equipment
IEC 61131.3 Programming Standards and Languages for PLC and DCS System
IEC 61508 Functional Safety of Electrical / Electronic / Programmable Safety Related System
IEC 60605 Equipment Reliability Testing
IEC 60331 Fire Resistant Cabling / Wiring
IEC 60332 Flame Retardant Cabling / Wiring
Nuclear Power Plants – Electrical Equipment of the Safety System

IEEE

IEEE C37.90.1
Guide for surge withstand capability tests.
IEEE 802.4 Information Processing System, Local Area Network Pt-4
IEEE 802.3 Ethernet Data Network
SAMA

PMC 33.1C
Radio Frequencies Sensitivity Test.

EIA

RS 232 & RS485

Serial Data Interface Standard.
EIA 568 / 569 Structured Cabling System for LAN

ANSI / ASME

ANSI / NEMA ICS.6
Enclosure for Industrial Control and System
ANSI / NEMA ICS.4 Terminal Blocks for Industrial Use
ANSI 315 Graphic Symbols for Electrical and Electronics Diagram
ASME B16.5 Pipe Flanges and Flanged Fittings

ISA

ISA S 5.1
Instrumentation Symbols and Identification
ISA S 5.2 Binary logic Diagrams for Process Operations.
ISA S 5.3 Symbols for Distributed Control/Shared Display Instrumentation, Logic and Computer Symbols.
ISA S 5.4 Instrument Loop Diagrams
ISA S 5.5 Graphic Symbols for Process Display
ISA S.20 Specification Forms for Process Measurement and Control Instruments, Primary elements and Control Valves
ISA S 18.1 Annunciator Sequences and Specification
ISA RP 55.1 Hardware Testing of Digital Process Computers
ISA RP 60.6 Nameplates, Labels and Tags or Control Centres
ISA S 84.01 Applications of Safety Instrumented Systems for the Process Industries
ISA S71.04 Environmental conditions.
ISA S75.01 Control Valve Sizing Equations.
ISA S75.02 Control Valve Capacity Test Procedure
ISA S75.03 Uniform face to face dimensions for flanged globe style control valve bodies.
ISA S 84.01
Application of Safety / Instrument System for the Process Industries
ISA RP 16.1,2,3,4,5,6 Terminology, Dimensions & Safety Practices for Indicating Variable Area Meters (Rotameter)
GPA

GPA – 2261 – 89
Publication for analysis for natural gas and similar gaseous mixtures by gas chromatography.
GPA – 2172 – 86 Publication for calculation of gross heating value, relative density and compressibility factor for natural gas mixtures from compositional analysis.

MIL

MIL-STD-1130
Wire Wrap Connections.
MIL-STD-1664(EC) Terminal point Wiring.

MISCELLANEOUS

AGA Report 3 Orifice Metering of Natural Gas
AGA Report 7 Turbine Metering of Natural Gas and Related Hydrocarbons Fluids
AGA Report 8 For Super Compressibility Factor Computation
AGA Report 9 For Ultrasonic Flow Measurement
NACE MR-01-75 Standard Material Requirements – Sulphide Stress Cracking Resistant Materials for Oilfield Equipment
ISO

ISO 5167.1
Measurement of Fluid Flow by Means of Orifice Plates, Nozzles and Venturi tubes Inserted in Circular Cross Section Conduits Running Full
ISO -TR 12765 Measurement of Fluid Flow in Closed Conduits – Methods using Transit time Ultrasonic Flow meters
NEC / NFPA

NFPA 72 National Fire Alarm Code
NEC/ NFPA 70 National Electrical Code

7.0 ELECTRICAL

IEEE

IEEE Std 493 Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems
IEEE Std 739 Recommended Practice for Energy Management in Industrial and Commercial Facilities
IEEE Std 80 Guide for safety in AC Substation Grounding
IEEE Std 141 Recommended Practice for Electric Power Distribution for Industrial Plants (IEEE Red Book)
IEEE Std 142 Recommended Practice for Grounding of Industrial and Commercial Power Systems ( IEEE Green Book)
IEEE Std 242 Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems
IEEE Std 446 Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications
IEEE Std 518 Guide for Installation of Electrical Equipment to minimise Noise Inputs Controllers from External Resources
IEEE Std 841 Recommended Practice for Petroleum and Chemical Industry Severe Duty Totally Enclosed Fan Cooled (TEFC) Squirrel Cage Induction Motors – Upto 500 HP
IEEE C2 National Electrical Safety Code
IEEE C57.12.00 General requirement for Liquid Immersed Distribution, Power and regulating Transformers
IEEE C57.12.01 General requirements for Dry Type Distribution and Power Transformers
IEEE C57.96 Guide for Loading Dry Type Distribution and Power Transformers
IEEE 112A Poly phase Induction Motors and Generators
IEEE 399 Power System Analysis
IEEE 4 Standard Technique for HV Testing
IEEE 367 Determining the Electric Power Station Ground Potential Rise & Induced Voltage for a Power Fault
IEEE C37.2 Electric Power System Device Function Numbers
IEEE C37.04 Rating Structure for AC High Voltage Circuit Breakers rated on a Symmetrical Current Basis
IEEE C37.90 Electric Power Apparatus, Relays & Relay Systems associated.
IEEE C37.91 Protective Relay Applications to Power Transformers
IEEE C.37.97 Protective Relay Applications to Power System Buses.
IEEE C37.100 Power Switchgear
IEEE C37.101 Generator Ground Protection Guide
IEEE C37.102 Guide for AC Generator Protection
IEEE C37.106 Abnormal Frequency Protection for Power Generating Plants
IEEE C57.13 Instrument Transformers
IEEE C62.92 Part-1 Guide for the Application of Neutral Grounding in Electricity Utility systems. Part 1 – Introduction
IEEE 515 Cables, Heating-Testing, Design, Installation & Maintenance of Electrical Resistance Heat Tracing for Industrial Applications- Recommended practice.
IEEE 525 Design & Installation of Cable Systems in substations
IEEE 944 Uninterruptible Power Supplies for Power Generating Stations- Recommended practice for the Application & Testing.

International Commission on Rules for the Approval of Electrical Equipment

CEE 17 Specification for Plugs and Socket Outlets for industrial purposes.
CEE 20 Specification for Hand held motor operated tools.

Electrical Research Association

ERA 69-30 Current rating Standards for distribution cables.

API

API RP 500
Recommended Practice for Classification of Locations for Electrical Installations
API STD 541 Form-Wound Squirrel-Cage Induction Motors – 250 Horsepower and Larger
API STD 546 Form-wound Brushless Synchronous Motors – 500 horsepower and Larger
API STD 610 Centrifugal Pumps for General Refinery service
API STD 614 Lubrication, shaft-sealing, and Control-Oil Systems for Special-Purpose Applications
API RP 2001 Fire Protection in Refineries
API RP 2003 Protection Against Ignitions Arising Out of Static, Lightning, and Stray Currents

GENERAL

NEMA
All relevant NEMA standards shall apply
ANSI C 80.1 Specification for Rigid Steel Conduit, Zinc Coated
ANSI C80.5 Specification for Rigid Aluminium Conduit
ANSI.C37.06 – 1987 Switchgear – AC High Voltage Circuit Breakers Rated on Symmetrical Current Basis
ANSI C57.12.91 Test Code for Power Transformers
AGMA 6019-E Gear motors using Spur, Helical, Herringbone, Straight Bevel or Spiral Bevel Gears
EPA 40 Code Federal regulations Part 761, Polychlorinated Biphenyl’s (PCBs) Manufacturing, Processing, Distribution in Commerce and Use Prohibitions
IES RP7 Practice for Industrial Lighting – lighting Handbook
NFPA 70B Electrical Equipment Maintenance
NFPA70E Electrical Safety Requirement for Employee Workplaces
NFPA 497M Classification of Gases, Vapors Dusts for Electrical Equipment In Hazardous (Classified) Locations
OSHA Occupational Safety and Health Standards (29 Code of Federal Regulations, part 1910)
UL 674 Electric Motors and Generators for Use in Hazardous Locations, Class I, Group C and D, Class II Groups E, F and G
UL 698 Industrial control Equipment for \use in Hazardous ( Classified) Locations
UL 913 Intrinsically Safety Apparatus and Associated apparatus for Use in Hazardous ( Classified ) Locations
UL 1242 Intermediate Metal Conduit

NEC

NEC/NFPA 70 National Electrical Code

8.0 TELECOMMUNICATIONS

8.1 Republic of Indonesia Laws and Regulations

a) Republic of Indonesia Law UU RI No. 36/ Year 1999 regarding Telecommunication

b) Indonesian Govt Regulation No.PP52 (Year 2000) regarding Telecommunication

c) Indonesian Govt Regulation No. 53 (Year 2000).

d) PERTAMINA regulations as applicable

e) All other latest statutory regulations as applicable

8.2 Guidance Notes and Publications

International Telecommunications Union
• The Radio Regulations, 1982:
• Volume 1: Radio Regulations.
• Volume 2: Appendices to Radio Regulations, Resolutions & Recommendations.

International Maritime Organisation
• International Convention for the Safety of Life at Sea (SOLAS). Consolidated Text, 1986.

Civil Aviation Authority CAP 452:1982
• Aeronautical Radio Stations Operator’s Guide.
• Consultative Committee for International Telephone and Telegraph (CCITT).
• Consultative Committee for International Radio.
• Federal Communication Commission (FCC).
• Admiralty Publication NP281(1)
• Inter-Governmental Maritime Consultative Organisation (IMCO); Safety of Life at Sea (SOLAS).
• List of Radio Signals:
• Volume 1: Coastal Radio Stations 0040 to 3960
• Part 1: Europe, Africa and Asia

9.0 CIVIL / STRUCTURAL

ASTM
ASTM A1
Standard Specification for Carbon Steel Tee Rails
ASTM A6 Specification for General Requirements for Delivery of Rolled Steel Plates, Shapes, Sheet Piles and Bars for Structural Use.
ASTM A36 Specification for Structural Steel.
ASTM A48 Specification for Grey Iron Castings
ASTM A 53 Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless.
ASTM A74 Standard Specification for Cast Iron Soil Pipe and Fittings
ASTM A82 Specification for Cold-Drawn Steel Wire for Concrete Reinforcement
ASTM A106
Specification for Seamless Carbon Steel Pipe for High-Temperature Service.
ASTM A120 Specification for Pipe- Steel, Black and Hot-dipped, Zinc-Coated, Welded and Seamless- for Ordinary Uses.
ASTM A123 Specification for Zinc (Hot-Dip Galvanised) Coatings on Iron and Steel Products
ASTM A143 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanised Structural Steel Products and Procedure for Detecting Embrittlement
ASTM A153 Specification for Zinc-Coating (Hot-Dipped) on iron and Steel Hardware
ASTM A185 Specifications for Welded Steel Wire Fabric for Concrete Reinforcement
ASTM A283 Specification for Grating
ASTM A307 Specification for Carbon Steel Bolts and Studs, 60,000 psi Tensile Strength
ASTM A325 Specification for High-Strength Bolts for Structural Joints
ASTM A361 Specification for Steel Sheet, Zinc Coated (Galvanised) by the Hot-Dip Process for Roofing and Siding
ASTM A385 Recommended Practice for Providing High Quality Zinc Coating (Hot Dip) on assembled Product
ASTM A446 Specification for Steel Sheet Zinc-Coated by the Hot-Dip Process, Structural (Physical) Quality
ASTM A500 Specification for Cold-formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ASTM A501 Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
ASTM A536 Specification for Ductile Iron Castings
ASTM A563 Specification for Carbon and Alloy Steel Nuts
ASTM A570 Specification for Hot Rolled Steel Sheet and Strip, Structural Quality
ASTM A572 Specification for High-Strength, Low-Alloy Columbium-Vanadium-Steels of Structural Quality
ASTM A615 Specification for Billet Steel Bars for Concrete Reinforcement
ASTM B108 Specification for Aluminium Alloy Permanent Mould Castings
ASTM C14 Standard Specification for Concrete Sewer, Storm Drain and Culvert Pipe
ASTM C 31 Standard Method of Making and Curing Concrete Test Specimens in the Field
ASTM C33 Standard Specification for Concrete Aggregates
ASTM C39 Standard Test Method for Compressor Strength of Cylindrical Concrete Specimens
ASTM C62 Specification for Building Brick
ASTM C76 Reinforced Concrete Culvert, Storm Drain and Sewer Pipe
ASTM C90 Specification for Hollow Load – Bearing Concrete Masonry Units
ASTM C94 Specifications for Ready-Mixed Concrete
ASTM C143 Specification for Test for Slump of Cement Concrete
ASTM C 150 Standard Specification for Portland Cement
ASTM C 172 Preparation of for Sampling Fresh Concrete
ASTM C 173 Specification for Test Method for Air Content of freshly Mixed Concrete by the Volumetric Method
ASTM C191-74 Test for Time of Setting Hydraulic cement by Vicat Needle
ASTM C 231 Specification for Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C 260 Specification for Air Entrained Admixture fore Concrete
ASTM C 270 Specification for Mortar for Unit Masonry
ASTM C 296 Asbestos-Cement Pressure Pipe
ASTM C 309 Specification for Liquid Membrane Forming Compounds for Curing Concrete
ASTM C 425 Compression Joints for Vitrified Clay Pipe and Fittings
ASTM C 428 Asbestos-Cement Non-pressure Sewer Pipe
ASTM C 443 Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets
ASTM C 494 Specification for Chemical Admixture for Concrete
ASTM C541 Standard Specification for Linings for Asbestos-Cement Pipe
ASTM C564 Rubber Gaskets for Cast Iron Soil Pipe and Fittings
ASTM C579-75 Test Method for Comprehensive Strength of Chemical-Resistant Mortars and Monolithic Surfacings
ASTM C685 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
ASTM C700 Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
ASTM C827-78 Test Method for early Volume Change of Cementitious Mixtures
ASTM D 424 Test for Plastic Limit and Plasticity Index for Soils
ASTM D1073 Specification for Fine Aggregate for Bituminous Paving Mixtures
ASTM D1141 Specification for Substitute Ocean Water
ASTM D1190 Specification for Concrete Joint Sealer, Hot-Poured Elastic Type
ASTM D1557 Moisture-Density Relations of Soils and Soil Aggregate
ASTM D1557 Tests for Moisture Density Relations of Soils and Soil Aggregate
ASTM D1751 Specification for Pre-formed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous types)
ASTM D1752 Specification for Pre-formed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
ASTM D1869 Rubber Rings for Asbestos-Cement Pipe
ASTM D2049 Relative Density of Cohensionless Soils
ASTM D2167 Tests for Density of Soil In-place by The Rubber Balloon Method
ASTM D2240 Specification for Test for Rubber Property Durometer Hardness
ASTM D2487 Classification of Soils for Engineering Purposes
ASTM D2564 Standard Specification for Solvent Cements for Poly Vinyl Chloride (PVC) Plastic Pipe and Fittings
ASTM D2855 Standard Specification for Making Solvent-Cemented Joints with Poly Vinyl Chloride (PVC) Pipe and Fittings
ASTM D2922 Test for Density of Soil and Soil Aggregate In-place by Nuclear Methods (Shallow Depth)
ASTM D3033 Standard Specification for Type PSP Poly Vinyl Chloride (PVC) Sewer Pipe and Fittings
ASTM D3034 Standard Specification for Type PSP Poly Vinyl Chloride (PVC) Sewer Pipe and Fittings
ASTM D3212 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM D4254 Maximum Index Density of Soils and Calculation of Relative Density
ASTM D698 Test for Moisture Density Relations of Soils
ASTM E34 Method for Chemical Analysis of Aluminium and Aluminium Alloys
ASTM E88 Practice for Sampling Non-Ferrous Metal and Alloys in Cast Form for Determination of Chemical Composition
ASTM F436 Hardened Steel Washers
ASTM F477 Standard Specification for Elastomeric Seals (gasket) for Joining Plastic Pipe
ASTM G5 Standards Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements.
AWS
AWS D1.1 Structural Welding Code – Steel
AWS A.2.4 Symbols for Welding and Non Destructive Testing.
AWS A.3.0 Welding Terms and Definitions.
AWS A.5.1 Specification for Carbon Steel Covered Arc Welding Electrodes.
AWS A.5.5 Specification for Low Alloy Steel Covered Arc Welding Electrodes.
AWS A.5.17 Specification for Bare Carbon Steel Electrodes for Submerged Arc Welding.
AWS A.5.18 Specification for Carbon Steel Filler Metals for Gas Shielded Arc Welding.
ACI
ACI 117 Standard Tolerance for Concrete Construction and Materials
ACI 207 Mass Concrete
ACI 211.1 Standard Practice for Selecting Proportions for Normal, Heavy Weight and New Concrete
ACI 214R Recommended Practice for Evaluation of Compression Test Results of Field Concrete
ACI 301 Specifications for Structural Concrete for Buildings
ACI 302.1 R Guide for Concrete Floor and Slab Construction
ACI 304 R Recommended Practice for Measuring, Mixing, Transporting and Placing Concrete
ACI 305 Hot Weather Concreting
ACI 306 Standard Specification for Cold Weather Concreting
ACI 308 Standard Practice for Curing Concrete
ACI 309 Guide for Consolidation of Concrete
ACI 311.5R Batch Plant Inspection and Field Testing of Ready-Mixed Concrete
ACI 315 Manual of Standard Practice for Detailing Reinforced Concrete Structures
ACI 318 Building Code requirements for Reinforced Concrete
ACI 347 Recommended Practice for Concrete Formwork
ACI 350 Environmental Engineering Concrete Structures
ACI 530 Building Code Requirements for Masonry Structures
ACI 531 Building Code Requirements for Concrete Masonry Structures
ACI 543 Recommendation for Design, Manufacture and Installation of Concrete Piles
ACI SP2 ACI Manual of Concrete Inspection

Miscellaneous

NI – 18(PMI) Indonesian Loading Code, latest edition
NI – 2(PBI) Indonesian Reinforced Concrete Code, latest edition
PPBBI Indonesian Steel Structure Designing Code
PUBI Indonesian General Requirements for Building Material
SII Indonesian Industrial Standards
SP10 Near White Metal Blast Cleaning
OSHA Chapter XVII Section 1910.23 Safety Requirements for Guarding Floor and Wall Openings and Holes
OSHA Chapter XVII Section 1910.24 Safety Requirements for Fixed Industrial Stairs
AASHTO M36 Standard Specification for Metallic Coated Corrugated Metal Culvert and Underdrains
AASHTO M190 Standard Specification for Bituminous Coated Corrugated Metal Culvert Pipe and Pipe Arches
AASHTO I-HB-16 Standard Specification for Highway Bridges
CRD C79-77 Test Method for Flow of Grout Mixtures (Flow Cone Method)
CRD C588-78A Specification for Nonshrink Grout
AWWA C600 Joining of Push-On Joint Pipe
AWWA 600 Installation of Ductile-Iron Water Mains and their Appurtenances
AWWA A21.51 Ductille Iron Pipe, Centrifugally Cast in Metal Molds, for Water or other Liquids
AWWA A21.11 Rubber Gasket Joints for Grey Iron and Ductile Pressure Pipe Fittings